TL;DR: 4GB RAM 64GB ROM Payment Terminal with 4G LTE Modem
AndroidSBC supply-chain sourcing update on the smart payment terminal board family serving international market, France. The WF-SPT-01 smart payment terminal Android motherboard covers the entry countertop payment terminal build for retail checkout and eleven sister configurations in the WF-SPT series, spanning the RK3568 quad-core ARM Cortex-A55 2.0GHz SoC with the ARM Mali-G52 2EE GPU, 5.5-inch 720x1280 MIPI DSI capacitive touch panel, and Android 12 with AOSP baseline and optional GMS firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-SPT family from the Longgang source factory in Shenzhen to international market and France importers who build countertop payment terminals, self-service kiosks, unattended vending and locker machines, transit ticketing gates and outdoor charging pillars.
About AndroidSBC and the Smart Payment Terminal Android Motherboard Family
Wanlin Manufacturing Group runs the smart payment terminal board programme out of Longgang in Shenzhen, where the twelve WF-SPT configurations are assembled, burned in and packed with their compliance documents. For international market and France importers the practical result is a single bill of materials per production lot and one qualification file per configuration. The qualification work happens on the Longgang bench with the actual printer mechanism, reader antenna and scan engine the France integrator intends to buy, and the current draw, the print speed and the decode result are written into the shipment file rather than left for the integrator to discover on site.
WF-SPT-01 Technical Specifications
| Parameter | AndroidSBC WF-SPT-01 (entry countertop payment terminal build for retail checkout) | Industry Average |
|---|---|---|
| Processor | RK3568 quad-core ARM Cortex-A55 2.0GHz SoC | Older dual-core or quad-core Cortex-A7 SoC |
| Process node | 22nm | Older 40nm process |
| GPU | Mali-G52 2EE | Older Mali-400 or basic 2D GPU |
| Memory | 2GB LPDDR4 | DDR3 512MB or 1GB on competing boards |
| Storage | 16GB eMMC plus TF card up to 128GB | NAND flash 4GB or 8GB on competing boards |
| Display and touch | 5.5-inch 720x1280 MIPI DSI capacitive touch panel with 5-point capacitive touch with glove and wet-finger support | 4.3-inch 480x800 panel with resistive touch |
| Payment and capture | NFC contactless reader, magnetic stripe and IC card slot with secure element | Camera-only QR capture with no scan engine |
| Printer and peripherals | 58mm thermal printer header with 90mm per second output | No printer control header on competing boards |
| Wireless and positioning | dual-band WiFi 802.11 a/b/g/n/ac with Bluetooth 5.0 | Single-band 2.4G WiFi 802.11n with no modem |
| Interfaces | 1 USB Type-C host and OTG, 1 RS232, 1 TTL UART, 4 GPIO, 1 thermal printer header | One USB port and no RS232 |
| Operating system | Android 12 with AOSP baseline and optional GMS | Android 9 or Android 10 on competing boards |
| Power and reliability | 12V DC barrel input with 5V/2A peripheral rail and RTC backup, -10C to 50C operating ambient | No battery management and no watchdog |
All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-SPT-01 (entry countertop payment terminal build for retail checkout) holds the touch panel, the thermal printer, the reader and the scan engine together while running the 72-hour burn-in loop, a configuration that competing single-platform boards rarely document at the top of the temperature window. For France importers sourcing the WF-SPT family, the WF-SPT-01-A variant is the typical configuration for the convenience store counter checkout use case, in a payment terminal footprint with a sustained weekly capacity of 5000 pcs/wk.
Challenges in Sourcing Smart Payment Terminal Android Motherboards for France Buyers
The first problem international market buyers hit is the difference between a sample that works and a configuration that repeats. A board can pass a bench test and still fail in volume if the printer driver, the scan engine mapping and the modem band list were never documented as part of the delivery.
Compliance is where a lot of cheap boards fail. The ANFR file has to name the exact modem, the exact printer mechanism and the exact panel that shipped to international market, and it has to be issued by a body the France acquiring partner recognises. For international market the decision usually comes down to one line on the quotation - whether the 35800 board lot arrives with the test report attached, or whether the integrator has to chase it after France customs has already flagged the pallet.
Competitive Comparison: WF-SPT-01 vs Competing Smart Payment Terminal Motherboards
A France integrator comparing two boards should compare the delivery file, not the datasheet. One side ships a test report and a compliance set; the other ships a board and a promise.
- vs consumer tablet boards: the WF-SPT family carries a printer control header, a reader antenna reference design and a scan engine UART mapping, none of which exist on a tablet derivative board.
- vs single-configuration boards: twelve configurations share one peripheral contract, so a international market buyer can move from a countertop lane to an unattended kiosk without re-qualifying the printer or the reader.
- vs boards without a firmware plan: signed images, staged OTA groups with rollback and a published maintenance window come standard, where competing boards ship an image and leave the France integrator to manage it.
- vs re-spun designs: the bill of materials is frozen per production lot for the length of the agreement, so the board that passed qualification in international market is the board that ships in volume.
Global Cashless Payment, Smart Terminal and Self-Service Checkout Market Trends
Market growth in France is concentrating in the formats where a human is not present at the moment of payment, which puts the watchdog, the modem band list and the offline buffer at the top of the international market specification.
- Countertop tier: WF-SPT-12 covers contactless, IC card, QR and receipt printing in one board, which is the configuration most staffed lanes standardise on.
- Unattended tier: WF-SPT-03 pairs the modem with the printer header and the watchdog for vending, lockers and kiosks where nobody is there to reboot the terminal.
- Flagship tier: WF-SPT-05 adds the larger memory and storage bundle, the customer-facing screen option and the wider temperature window that outdoor and high-throughput formats require.
The France market is large enough to absorb several suppliers and disciplined enough to punish the ones who re-spin boards between lots. Holding the configuration is the strategy, and it is the one AndroidSBC runs for international market.
WF-SPT-01 Application Scenarios
The WF-SPT-01 entry countertop payment terminal build for retail checkout sits inside a twelve-configuration WF-SPT Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-SPT-01-A configuration is the typical build for the convenience store counter checkout use case, with printer current profile, scan engine mapping and staged OTA management bundled.
- Convenience and grocery counters: the WF-SPT-02 takes contactless, IC card and QR at the till and prints the receipt in one pass.
- Restaurant and quick-service counters: the WF-SPT-05 runs order entry, payment and kitchen ticket printing on the same board.
- Unattended vending and lockers: the WF-SPT-08 pairs the modem with the printer header and the watchdog for sites with no staff present.
- EV charging and fuel forecourts: the WF-SPT-09 holds the wide input range and the sunlight readable panel through a full outdoor season.
- Transit gates and event entry: the WF-SPT-08 takes contactless payment and prints the entry ticket without a fixed counter.
- Self-checkout lanes: one board drives the main panel, the scanner and the receipt printer, with the customer screen option where the format needs it.
- Hotel and resort reception: card pre-authorisation, signature capture and folio printing on a board that also runs the restaurant terminal.
- Hospital and clinic payment desks: card, QR and insurance capture on a locked-down build with staged OTA and an audit trail.
- Government and municipal counters: tax, permit and fee payment on a configuration held for the length of the agreement.
Partnership Models for international market Buyers
For international market partners the choice is between stocking the board, integrating the board or branding the board, and each track carries a different level of engineering support.
- Distribution track: the partner buys the WF-SPT board against a published price list, keeps its own stock, and AndroidSBC supplies the printer profile, the scan mapping and the compliance documents with each lot.
- Integration track: the partner takes the board plus firmware customisation, receipt and language localisation and peripheral validation support, with a joint qualification run at the Longgang factory.
- Private-label track: the WF-SPT board ships under the partner brand with customised boot logo, packaging, enclosure and documentation, on a fixed bill of materials held for the length of the agreement.
All three tracks ship from the same source factory with the same compliance file, which is why international market partners can move between them as a France programme grows.
Frequently Asked Questions
Does the smart payment terminal board family support an entry countertop payment terminal build for retail checkout?
Answer: Yes. The entry countertop payment terminal build for retail checkout ships as a standard configuration, qualified on the Longgang bench with the printer mechanism, the reader antenna and the scan engine that the international market integrator will install.
Which configurations are available in the WF-SPT family for France buyers?
Answer: Twelve configurations span Rockchip RK3568 and the rest of the range: RK3568, RK3566, RK3576, RK3288 and RK3399 plus Allwinner A133, A64, H618 and T527, all on one peripheral contract.
Can one smart payment terminal board drive a touch panel, a thermal printer and a scan engine at once?
Answer: Yes. One WF-SPT board drives the touch panel, the thermal printer and the scan engine simultaneously, and the current budget for all three is measured on the bench and written into the shipment file.
What payment scheme certification support does AndroidSBC provide for France?
Answer: Certification support for France means ANFR conformity documentation, CE marking with ANFR radio interface registration test reports and a firmware signing record, all bundled into the shipment rather than sent after customs clearance in international market.
What is the minimum order quantity and the sample lead time for France?
Answer: The minimum for a customised build is higher than for a stock configuration, but a international market buyer can start with a sample lot, qualify it on the bench, and then move to a production slot without re-qualification.
Is custom ROM, boot logo or pre-installed app development available?
Answer: Yes. AndroidSBC builds the custom image, validates it against the peripheral contract and ships it on the board, which removes the flashing step from the France integration plan.
How are firmware updates delivered to a France device estate after deployment?
Answer: Firmware is delivered as signed images through staged OTA groups with rollback, so a France estate can be updated in waves rather than all at once, with a published maintenance window.
What shipping terms does AndroidSBC support for France orders?
Answer: AndroidSBC supports EXW, FOB, CIF and DAP, quotes Port of Marseille as the default port for France, and prepares the customs file before the container closes for international market.
Contact AndroidSBC: Start Your WF-SPT-01 Sourcing Conversation
Every international market programme starts the same way at AndroidSBC: the format, the peripherals, the certification calendar, then a quotation that holds the configuration for the term.
- Email: Androidsbc@163.com
- Export service hotline: +8613261677119
- Website: https://www.androidsbc.com
- Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China
OEM, ODM and private-label tracks are open for France. AndroidSBC supplies the board, the firmware, the documentation and the qualification support, and international market partners own the channel.
