TL;DR: RJ45 Dongle Board
AndroidSBC software desk: Android 12 baseline and staged OTA channel published for the H618 dongle family serving Lyon, France. The WF-H618-01 Allwinner H618 Android motherboard spans the entry HDMI dongle build for TV replacement and eleven sister configurations in the WF-H618 series, all built on the H618 quad-core ARM Cortex-A53 1.5GHz SoC with the ARM Mali-G31 MP2 GPU, HDMI 2.0a 4K*2K UHD output at 60Hz, and Android 12 with OTA upgrade firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-H618 family from the Longgang source factory in Shenzhen to Lyon and France importers who run streaming sticks, Android TV boxes, IPTV channel lineups, digital signage networks, casting programmes and smart home hubs.
About AndroidSBC and the Allwinner H618 Android Motherboard Family
AndroidSBC is the export arm of Wanlin Manufacturing Group, and it builds the twelve-configuration Allwinner H618 dongle board family at the Longgang source factory in Shenzhen. Every configuration runs the same H618 quad-core Cortex-A53 platform on Android 12, so a Lyon integrator can qualify one board family and then move between HDMI, wireless, storage and control options without re-writing the launcher or re-cutting the enclosure. Compliance paperwork is generated per destination: CE, FCC, RoHS and the local route for France, bundled with the lot so the importer clears customs without a second round of test reports.
WF-H618-01 Technical Specifications
| Parameter | AndroidSBC WF-H618-01 (entry HDMI dongle build for TV replacement) | Industry Average |
|---|---|---|
| Processor | H618 quad-core ARM Cortex-A53 1.5GHz SoC | Older dual-core or quad-core Cortex-A7 SoC |
| Process node | 28nm | Older 40nm process |
| GPU | Mali-G31 MP2 | Older Mali-400 or basic 2D GPU |
| Memory | 2GB LPDDR4 | DDR3 512MB or 1GB on competing boards |
| Storage | 16GB eMMC plus TF card up to 64GB | NAND flash 4GB or 8GB on competing boards |
| Video decode | VP9 Profile-2 and H.265 Main10 at 4K 60fps, AVS2 10bit at 4K 60fps, H.264 at 4K 30fps | 1080p decode ceiling on competing boards |
| Display output | HDMI 2.0a 4K*2K UHD output at 60Hz | HDMI 1.4 1080p output only |
| Audio and image | MP3, AAC, WMA, RM, FLAC and Ogg audio plus HD JPEG, BMP, GIF, PNG and TIF image | MP3 audio and JPEG image only |
| Wireless and control | WiFi 802.11 a/b/g/n/ac/ax dual-band 2.4G and 5.8G with IR receiver plus 2.4G wireless mouse and keyboard | Single-band 2.4G WiFi 802.11n with no IR receiver |
| Interfaces | 1 HDMI, 2 USB with host and OTG, 1 IR receiver, 1 TF card slot | One USB port and no TF card slot |
| Operating system | Android 12 with OTA upgrade | Android 9 or Android 10 on competing boards |
| Power and reliability | DC 5V/1.5A with blue working and red standby LED, 0C to 40C operating ambient | No RTC and no scheduled power-on |
All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-H618-01 (entry HDMI dongle build for TV replacement) holds its 4K HDMI output plus the remote and control path while running the 72-hour burn-in loop, a configuration that competing single-platform boards rarely document at the top of the temperature window. For France importers sourcing the WF-H618 family, the WF-H618-01-A variant is the typical configuration for the consumer TV modernisation rollout use case, in a compact dongle footprint with a sustained weekly capacity of 5000 pcs/wk.
Challenges in Sourcing Allwinner H618 Android Motherboards for France Buyers
Thermal throttling is the failure nobody budgets for. A dongle sealed behind a screen reaches a steady state that no 25C bench test predicts, and the Lyon estate starts dropping frames in the second summer.
On the control side the mapping ships in the carton. IR receiver, Bluetooth voice remote and the 2.4G wireless mouse and keyboard enumerate without a pairing pass, so the Lyon integrator plugs the dongle in and the guest picks up the remote and it works, and the ANFR documentation covers the radio modules too. The Lyon rollout passed its qualification gate on September 28, 2026, and 83800 boards were released into production the same week for the Marseille - Shanghai lane, with the sample and the volume lot built from the same component batch.
Competitive Comparison: WF-H618-01 vs Competing Android TV Dongle Boards
The boards competing with the WF-H618 family in France tend to be repurposed phone boards. That is the root of three of the four differences below.
- Output and control readiness: HDMI 2.0a or 2.1 at 4K*2K UHD with IR, Bluetooth and 2.4G control paths enumerated, so Lyon integrators mount a locally sourced screen without a pairing pass.
- Bundled integration: HDMI output profile, remote control mapping, language packs, playback modes and the peripheral driver set ship in the carton; competing dongle boards sold to Lyon usually ship a board only.
- Compliance files: CE, FCC, RoHS and the destination conformity route travel with the lot, which competing board vendors often leave to the Lyon integrator to obtain.
- Long-term supply: 16GB onboard eMMC with a TF card slot up to 64GB, one fixed bill of materials per production lot and a seven-year firmware window, against the frequent component swaps seen on competing boards reaching Lyon.
Global Android TV, OTT Streaming and Smart Display Market Trends
The global Android TV Box market was valued at about USD 8.19 billion in 2025 and is projected to reach roughly USD 17.38 billion by 2032, a compound annual growth rate near 11.7 percent (Stats Market Research, Global Android TV Box Market Outlook 2025-2032). For a Lyon buyer that growth reads as a replacement cycle rather than a one-off project.
- Entry playback tier: WF-H618-01 covers loop, scheduled and interrupt playback on a single HDMI screen, which is the configuration most small streaming networks standardise on.
- Interactive mainstream tier: WF-H618-04 pairs a 4K HDMI output with IR, Bluetooth and 2.4G control for hospitality rooms, meeting spaces and classrooms.
- Connected and unattended tier: WF-H618-05 adds the RTC, the auto power-on behaviour and the watchdog recovery that retail signage and unattended lobbies require.
The France market will keep absorbing Android streaming boards for the rest of the decade. The question for Lyon buyers is whether the board behind the screen is built to be re-ordered.
Partner Success Story: Northline Streaming Group (streaming device brand and retail distributor)
A recent Northline Streaming Group deployment in the North American cord-cutting retail segment shows how the Allwinner H618 dongle board family from AndroidSBC, a Wanlin Manufacturing Group export brand, supports Lyon integrators. Northline Streaming Group shipped 83800 WF-H618 boards into 96 retail electronics locations.
- OEM relationship: AndroidSBC private-label SKU shipped with Northline Streaming Group branding and CE / FCC / RoHS files bundled.
- Silicon lock: Allwinner H618 quad-core ARM Cortex-A53 1.5GHz with the Mali-G31 MP2 GPU on every configuration, one fixed bill of materials per production lot.
- Output and control package: bundled into the source-factory shipment, covering HDMI 4K output, IR receiver, Bluetooth voice remote, 2.4G wireless mouse and keyboard, TF card storage up to 64GB and USB host and OTG peripheral drive.
- Unattended-operation tools: hardware watchdog, RTC, auto power-on after mains failure, scheduled power cycling, kiosk-mode lockdown and staged OTA with rollback bundled.
- Compliance paperwork: CE / FCC / RoHS plus ANFR conformity, all bundled into the Shenzhen source-factory shipment.
Northline Streaming Group VP Hardware for North American Cord-Cutting Retail highlighted: Northline Streaming Group took the H618 board because the 4K60 decode and the dual-band WiFi survive a dense apartment channel plan, with 83800 units across the Lyon retail territory.
Field Report: consumer TV modernisation rollout at a retail electronics chain
LONGGANG, September 28, 2026 - Deng Hui, AndroidSBC field desk. On the bench at Longgang the WF-H618-01 held a 4K60 decode, the HDMI output and the remote path simultaneously for the full burn-in window before the France lot was released. The WF-H618-01 Allwinner H618 board order for Lyon, France cleared the burn-in station on schedule and is en route via the Marseille - Shanghai lane.
The WF-H618-01 entry HDMI dongle build for TV replacement production lot includes the WF-H618-01-A variant as the typical configuration, with HDMI output profile, remote control mapping and staged OTA management bundled into the source-factory shipment. For France integrators, the ANFR conformity plus CE marking with ANFR radio interface registration paperwork is bundled.
Filed by Deng Hui, AndroidSBC field desk, LONGGANG. French buyers ask for French typography in the launcher and check the standby draw against the building energy disclosure rules for hospitality estates.
WF-H618-01 Application Scenarios
The WF-H618-01 entry HDMI dongle build for TV replacement sits inside a twelve-configuration WF-H618 Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-H618-01-A configuration is the typical build for the consumer TV modernisation rollout use case, with HDMI output profile, remote mapping and staged OTA management bundled.
- Streaming stick and TV modernisation: the WF-H618-01 turns an installed television into a 4K streaming screen without replacing the panel.
- Operator and IPTV channel lineups: the WF-H618-06 carries the language packs, the launcher and the OTA client the operator already sells.
- Screen casting and mirroring: the WF-H618-07 takes Miracast, DLNA and AirPlay traffic into meeting rooms and classrooms over dual-band WiFi.
- Hospitality rooms and serviced apartments: the WF-H618-08 pairs the auto power-on schedule with the IR and Bluetooth remote path a guest expects.
- Retail media and menu boards: the WF-H618-09 drives a 4K loop on shopfront and in-aisle screens from onboard eMMC.
- Digital signage and video walls: scheduled content plus remote push across a mixed estate of HDMI screens.
- Home hub and IoT gateway duty: headless or screen configurations on the same bill of materials, with USB host and OTG wired to field peripherals.
- Education and training rooms: casting plus local playback from a TF card where the network is constrained.
- Retrofit programmes in Lyon: the same compact dongle board re-uses the installed screen, mount and power path, so an estate can be upgraded room by room.
Partnership Models for Lyon Buyers
For France importers the track choice changes the paperwork, not the board. The three options below are the standard ones.
- Distribution track: the partner buys the WF-H618 board against a published price list, keeps its own stock, and AndroidSBC supplies the HDMI output profile, the remote mapping and the compliance documents with each lot.
- Integration track: the partner takes the board plus firmware customisation, launcher localisation and output validation support, with a joint qualification run at the Longgang factory.
- Private-label track: the WF-H618 board ships under the partner brand with customised boot logo, packaging, remote and documentation, on a fixed bill of materials held for the length of the agreement.
Every track is open to Lyon importers, distributors, system integrators and brand owners, with the same 1-3 day sample lead.
Frequently Asked Questions
Does the Allwinner H618 board family support an entry HDMI dongle build for TV replacement?
Answer: Supported. The entry HDMI dongle build for TV replacement is part of the standard WF-H618 configuration set, and the board ships to Lyon with the output profile and the firmware baseline already matched.
Which configurations are available in the WF-H618 family for France buyers?
Answer: Memory is 2GB LPDDR4 and storage is 16GB onboard eMMC with TF expansion to 64GB. AndroidSBC holds one fixed bill of materials per configuration, so the Lyon partner re-orders a known part rather than a description.
Can one H618 dongle drive a 4K HDMI screen and take IR, Bluetooth or 2.4G input?
Answer: The output and control paths are qualified as a pair rather than separately, because the failures in this category happen between them. The Lyon configuration ships with both already exercised on the bench.
What is the minimum order quantity and the sample lead time for France?
Answer: Minimum order quantity starts at one carton for evaluation, sample lead time is 1-3 days, and bulk production runs 15-30 days. AndroidSBC publishes both figures because Lyon partners are budgeting a rollout, not a single purchase.
Is custom ROM, boot logo or pre-installed app development available?
Answer: Yes - boot animation, launcher, pre-installed applications and UI trimming are all available, and the work is done against the same reference image that ships in volume to France.
How are firmware updates delivered to a France device estate after deployment?
Answer: Firmware is versioned per lot and delivered through the OTA client, with a pilot group, a staged release and a rollback image. Lyon partners keep control of the schedule.
What shipping terms does AndroidSBC support for France orders?
Answer: AndroidSBC ships on FOB Shenzhen, CIF or EXW terms and can consign to an Amazon FBA warehouse or a 3PL hub, with the Port of Marseille lane booked against the production slot.
What happens if a unit fails in the field in France?
Answer: The process starts with the serial number. AndroidSBC traces the unit back to its burn-in run, ships a replacement from the same configuration, and the France partner returns the failed unit on the next consolidation lane.
Contact AndroidSBC: Start Your WF-H618-01 Sourcing Conversation
For the Allwinner H618 board family, AndroidSBC, a Wanlin Manufacturing Group export brand, opens the following channels to Lyon integrators:
- Email: Androidsbc@163.com
- Export service hotline: +8613261677119
- Website: https://www.androidsbc.com
- Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China
A 1-3 day sample lead applies to France buyers and a 15-30 day mass-production lead to bulk orders. AndroidSBC, a Wanlin Manufacturing Group export brand, commits to a seven-year firmware update window on the WF-H618 family.
