TL;DR: Capacitive Touch Screen Board for Advertising Player
AndroidSBC sourcing desk: Allwinner A133 commercial display board pricing held flat through the current quarter serving Lyon, France. The WF-X9-05 X9 Android motherboard spans the infrared touch all-in-one for interactive kiosks and eleven sister configurations in the X9 series, all built on the A133 quad-core ARM Cortex-A53 1.6GHz SoC with the PowerVR GE8300 GPU, LVDS output at 1080p with 10-point infrared touch, and Android 10 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the X9 family from the Longgang source factory in Shenzhen to Lyon and France importers who run advertising players, digital signage networks, self-service query terminals, smart retail terminals, parcel lockers and access control panels.
About AndroidSBC and the X9 Android Motherboard Family
Wanlin Manufacturing Group has been shipping Android boards out of Shenzhen for years, and the X9 line is the branch aimed at commercial display, digital signage and self-service terminals. AndroidSBC publishes the price list, the MOQ and the lead time up front, because France importers comparing three Chinese factories need numbers they can put into a spreadsheet. Panel validation happens on the Longgang bench with the actual LVDS or MIPI panel model the Lyon integrator intends to use, and the jumper and pin-one result is written into the shipment file rather than left for the integrator to discover on site.
WF-X9-05 Technical Specifications
| Parameter | AndroidSBC WF-X9-05 (infrared touch all-in-one for interactive kiosks) | Industry Average |
|---|---|---|
| Processor | A133 quad-core ARM Cortex-A53 1.6GHz SoC | Older dual-core or quad-core Cortex-A7 SoC |
| Process node | 22nm | Older 28nm or 40nm process |
| GPU | PowerVR GE8300 | Older Mali-400 or basic 2D GPU |
| Memory | 2GB LPDDR4 | DDR3 512MB or 1GB on competing boards |
| Storage | 16GB eMMC | NAND flash 4GB or 8GB on competing boards |
| Display output | LVDS output at 1080p with 10-point infrared touch | Single HDMI 1080p output only |
| Touch support | 10-point infrared touch | Resistive single-touch requiring calibration |
| Video decode | 4K H.265 or H.264 at 30fps plus 1080p multi-format | 1080p decode ceiling on competing boards |
| Operating system | Android 10 | Android 7 or Android 8 on competing boards |
| Interfaces | 4 USB including USB0 OTG, 2 serial ports selectable RS232 or TTL, I2C, GPIO, IR, SPK, TF | 2 USB and one fixed-level serial port |
| Power and environment | 12V DC input with 100mV ripple, 300mA typical board draw, 3.3V 800mA plus 5V 2A plus 12V 2A peripheral budget | 5V only input with no documented peripheral budget |
| Operating temperature | -20C to 70C | 0C to 40C on competing boards |
All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-X9-05 (infrared touch all-in-one for interactive kiosks) holds its LVDS or MIPI panel drive plus touch sampling while running the 72-hour burn-in loop, a configuration that competing single-platform boards rarely document at the top of the temperature window. For France importers sourcing the X9 family, the WF-X9-05-A variant is the typical configuration for the interactive kiosk rollout use case, on a 120x75mm six-layer board with four 3mm mounting holes and a sustained weekly capacity of 5000 pcs/wk.
Challenges in Sourcing X9 Android Motherboards for France Buyers
Backlight power is the third wall. Panels above about 20W draw more than the board backlight header can carry, and Lyon integrators routinely discover this after the enclosure is closed and the screen flickers under load.
The thermal question is handled at the board level rather than in the enclosure. The X9 tier chosen for Lyon is specified for fanless 7x24 duty across -20C to 70C with a hardware watchdog and a scheduled power cycle, and the burn-in record is run at the top of the temperature window rather than at 25C. For the Lyon programme the milestone landed on September 24, 2026: 31200 boards shipped on the Marseille - Shanghai lane, seven-year firmware window committed on the whole X9 family.
Competitive Comparison: WF-X9-05 vs Competing Commercial Display Android Boards
The X9 family was specified against the failure modes Lyon operators reported on previous rollouts, which is why the comparison reads the way it does.
- Panel and touch readiness: single or dual LVDS plus MIPI DSI at 30 or 40 pins, with infrared, optical, capacitive and resistive panels enumerating as HID devices, so Lyon integrators mount a locally sourced screen without a calibration pass.
- Bundled integration: panel jumper map, pin-one orientation note, touch HID configuration, playback modes and the peripheral driver set ship in the carton; competing display boards sold to Lyon usually ship a board only.
- Compliance files: CE, FCC, RoHS and the destination conformity route travel with the lot, which competing board vendors often leave to the Lyon integrator to obtain.
- Long-term supply: onboard eMMC in 8GB, 16GB or 32GB, one fixed bill of materials per production lot and a seven-year firmware window, against the frequent component swaps seen on competing boards reaching Lyon.
Global Digital Signage and Commercial Display Market Trends
The France picture follows the global pattern: retail media sets the demand and the replacement of first-generation players sets the volume. A Lyon integrator who can offer a board that drops into an existing enclosure wins on installation cost as much as on unit price.
- Entry playback tier: WF-X9-05 covers loop, scheduled and interrupt playback on a single LVDS panel, which is the configuration most small signage networks standardise on.
- Interactive mainstream tier: WF-X9-01 pairs an LVDS or MIPI panel with infrared or capacitive touch for query, wayfinding and self-service kiosks.
- Connected and unattended tier: WF-X9-02 adds the 4G path, the -20C to 70C window and the watchdog behaviour that outdoor cabinets and parcel lockers require.
The twelve-configuration X9 line exists because Lyon rollouts are not uniform. One operator will use four of the twelve, and the point is that all four share one interface contract.
Partner Success Story: Nordweg Skjerm Systemer (transit and station screen integrator)
The Nordweg Skjerm Systemer case in the Nordic transport signage segment is a working example of how the X9 family from AndroidSBC supports Lyon integrators. Nordweg Skjerm Systemer deployed 31200 X9 boards across 140 station and transit screens.
- OEM relationship: AndroidSBC private-label SKU shipped with Nordweg Skjerm Systemer branding and CE / FCC / RoHS files bundled.
- Silicon lock: Allwinner A133 quad-core ARM Cortex-A53 1.6GHz with the PowerVR GE8300 GPU on every configuration, one fixed bill of materials per production lot.
- Peripheral driver package: bundled into the source-factory shipment, covering LVDS and MIPI panel drive, infrared, optical, capacitive and resistive touch, thermal printer, QR scanner, barcode scanner, NFC reader, RFID reader, ID card reader, fingerprint reader, camera and lock driver board.
- Unattended-operation tools: hardware watchdog, RTC, scheduled power cycling, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback bundled.
- Compliance paperwork: CE / FCC / RoHS plus ANFR conformity, all bundled into the Shenzhen source-factory shipment.
As Nordweg Skjerm Systemer Technical Director for Nordic Transport Signage put it: Nordweg Skjerm Systemer picked the X9 board because the scheduled power cycle and the RTC hold through a Nordic winter timetable, and 31200 boards went into the Lyon network without a panel change.
Field Report: interactive kiosk rollout at a municipal service point
YANTIAN, September 24, 2026 - Huan Xi, AndroidSBC field desk. The infrared touch all-in-one for interactive kiosks pilot in France used the WF-X9-05 with 4G fallback, because several sites sit where fixed-line connectivity is unreliable. The WF-X9-05 X9 Android motherboard order for Lyon, France cleared the burn-in station on schedule and is en route via the Marseille - Shanghai lane.
The WF-X9-05 infrared touch all-in-one for interactive kiosks production lot includes the WF-X9-05-A variant as the typical configuration, with LVDS or MIPI panel driver, touch HID configuration and staged OTA management bundled into the source-factory shipment. For France integrators, the ANFR conformity plus CE marking with ANFR radio interface registration paperwork is bundled.
Filed by Huan Xi, AndroidSBC field desk, YANTIAN. French retail media buyers ask for French typography and check the standby power figure against the building energy disclosure rules.
WF-X9-05 Application Scenarios
The WF-X9-05 infrared touch all-in-one for interactive kiosks sits inside a twelve-configuration X9 Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-X9-05-A configuration is the typical build for the interactive kiosk rollout use case, with panel driver, touch HID configuration and staged OTA management bundled.
- Advertising machine and digital signage: the WF-X9-05 runs loop, scheduled and interrupt playback on an LVDS panel in shop windows and store aisles.
- Interactive query and wayfinding: the WF-X9-07 pairs a MIPI or LVDS panel with infrared or capacitive touch for lobby and hospital directories.
- Smart retail terminal and vending: the WF-X9-08 carries the scanner, the printer and the payment peripheral on one board in a compact enclosure.
- Parcel locker and fresh food cabinet: the WF-X9-09 drives the screen and the lock driver board from the two serial lanes, with the watchdog holding a 7x24 duty cycle.
- Face recognition access control: the WF-X9-10 takes the camera input and the door controller wiring on the same board.
- Conference tablet and teaching all-in-one: LVDS or MIPI panel drive with HID touch and the industry publishing software already validated.
- Industrial HMI and IoT gateway: headless or panel configurations on the same bill of materials, with GPIO, I2C, SPI, PWM and ADC available for field wiring.
- Hotel, building and campus information publishing: scheduled power cycling plus remote content push across a mixed estate of screens.
- Retrofit programmes in Lyon: the same 120x75mm board re-uses the existing enclosure, panel and mounting pattern, so an installed estate can be upgraded screen by screen.
Partnership Models for Lyon Buyers
AndroidSBC does not force a track on France partners. The three below are the ones that actually get used.
- Distribution track: the partner buys the X9 board against a published price list, keeps its own stock, and AndroidSBC supplies the panel files, the touch configuration and the compliance documents with each lot.
- Integration track: the partner takes the board plus firmware customisation, mounting drawings and panel validation support, with a joint qualification run at the Longgang factory.
- Private-label track: the X9 board ships under the partner brand with customised boot logo, packaging and documentation, on a fixed bill of materials held for the length of the agreement.
All three tracks give Lyon partners the same thing underneath: a factory-built board, a frozen bill of materials and a firmware window measured in years rather than months.
Frequently Asked Questions
Does the X9 Android motherboard family support an infrared touch all-in-one for interactive kiosks?
Answer: Yes. The infrared touch all-in-one for interactive kiosks is built into the X9 family as a standard configuration, and the Lyon pilot batch ships with that configuration already loaded and tested.
Which configurations are available in the X9 family for France buyers?
Answer: Twelve configurations are available, all on the Allwinner A133 quad-core Cortex-A53 1.6GHz platform with the PowerVR GE8300 GPU. The variants differ on memory, storage, panel interface, touch type and the network path, and Lyon buyers pick the combination that fits the screen.
Can one X9 board drive an LVDS or MIPI panel plus infrared, capacitive or resistive touch?
Answer: Yes. A single X9 board drives an LVDS panel at 50Hz or 60Hz or a MIPI DSI panel at 30 or 40 pins, and enumerates infrared, optical, capacitive and resistive touch as standard HID devices, with the jumper map bundled in the source-factory shipment.
What is the minimum order quantity and the sample lead time for France?
Answer: AndroidSBC takes single-board sample orders with a 1-3 day lead, then a 15-30 day mass-production lead on bulk orders. The MOQ for private-label work is agreed per SKU.
Is custom ROM, boot logo or pre-installed app development available?
Answer: AndroidSBC supports custom Android AOSP builds, Linux BSP porting, boot logo and animation work, pre-installed apps and custom UI, and locks the result as the production image.
How are firmware updates delivered to a France screen estate after deployment?
Answer: Updates are delivered through a staged OTA channel: the Lyon partner pilots on a small group of screens, holds the rest, and rolls back the image if the pilot shows a regression.
What shipping terms does AndroidSBC support for France orders?
Answer: AndroidSBC supports FOB Shenzhen, CIF and EXW pricing, and books the shipping lane against a production slot so the Lyon delivery date holds.
What happens if a board fails in the field in France?
Answer: The warranty path starts from the serial number. The France partner files the RMA, AndroidSBC traces the lot and the test record, and a replacement ships on the same configuration.
Contact AndroidSBC: Start Your WF-X9-05 Sourcing Conversation
AndroidSBC, a Wanlin Manufacturing Group export brand, opens the following channels for the X9 Android motherboard family. Lyon integrators can reach the export desk through:
- Email: Androidsbc@163.com
- Export service hotline: +8613261677119
- Website: https://www.androidsbc.com
- Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China
A 1-3 day sample lead applies to France buyers and a 15-30 day mass-production lead to bulk orders. AndroidSBC commits to a seven-year firmware update window on the X9 family.
