TL;DR: POS Board RS485 Serial Port for Supermarket Checkout Lane
AndroidSBC software desk: Android 15 baseline and staged OTA channel published for the WF-P family serving Lyon, France. The WF-P7600 POS Android motherboard spans the dual-screen POS terminal with cashier and customer display and eleven sister models in the WF-P series, all built on the RK3576 octa-core ARM Cortex-A72 2.2GHz plus Cortex-A53 64-bit SoC with the ARM Mali-G52 MC3 GPU, LVDS plus HDMI dual independent output at 1080p, and Android 13 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-P family from the Longgang source factory in Shenzhen to Lyon and France importers who run supermarket checkout lanes, convenience counters, restaurant tills, hotel front desks, fuel forecourt cabinets and unattended payment kiosks.
About AndroidSBC and the POS Android Motherboard Family
Wanlin Manufacturing Group runs the Longgang production site where the WF-P POS motherboard family is assembled, burned in and packed. AndroidSBC handles the export side, and the two sit in the same building, which is why France importers get a fixed bill of materials per lot rather than a board that silently changes silicon between shipments. The AndroidSBC engineering desk keeps a reference image per silicon tier, so a France partner developing against the RK3576 board is testing against the same build that ships in volume, not a one-off sample image.
WF-P7600 Technical Specifications
| Parameter | AndroidSBC WF-P7600 (dual-screen POS terminal with cashier and customer display) | Industry Average |
|---|---|---|
| Processor | RK3576 octa-core ARM Cortex-A72 2.2GHz plus Cortex-A53 64-bit SoC | Older 28nm or 40nm quad-core SoC |
| Process node | 8nm | Older 28nm or 40nm process |
| GPU | Mali-G52 MC3 | Older Mali-450 or basic GPU |
| NPU / AI | 6 TOPS | No NPU on competing entry boards |
| Memory | 8GB LPDDR4X | DDR3 1GB / 2GB on competing boards |
| Storage | 64GB eMMC | eMMC 5.0 8GB / 16GB on competing boards |
| Display output | LVDS plus HDMI dual independent output at 1080p | Single HDMI 1080p only on competing boards |
| Touch support | 10-point capacitive touch on both panels | Resistive single-touch on competing boards |
| Operating system | Android 13 | Android 8 or Android 9 on competing boards |
| Connectivity | WiFi 6 802.11ax plus Bluetooth 5.0 plus dual Gigabit Ethernet | WiFi 4 plus 10/100M Ethernet on competing boards |
| POS peripherals | Thermal printer, receipt printer, barcode scanner, cash drawer, customer display | No bundled printer, scanner or drawer driver SDK on competing boards |
| Operating temperature | 0C to 50C | 0C to 40C on competing boards |
All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-P7600 (dual-screen POS terminal with cashier and customer display) maintains its 4K HDMI output plus capacitive touch sampling while running the burn-in test loop, a configuration that competing single-platform boards cannot sustain at 60fps. For France importers sourcing the WF-P family, the WF-P7600-A variant is the typical configuration for the supermarket checkout lane rollout use case, with a sustained weekly capacity of 5000 pcs/wk.
Challenges in Sourcing POS Android Motherboards for France Buyers
The seventh obstacle is lead time volatility. A Lyon chain planning a store opening cannot absorb a board that moves from a 15-day to a 60-day lead because a memory allocation disappeared.
For Lyon integrators worried about the trading-company risk, AndroidSBC ships from the same building the boards are built in. The source factory address is on the packing list, the test record carries a serial number, and the CE marking with ANFR radio interface registration route used in France is issued against that factory, not against a reseller. The Lyon rollout passed its qualification gate on September 23, 2026, and 83700 boards were released into production the same week for the Marseille - Shanghai lane, with the sample and the volume lot built from the same component batch.
Competitive Comparison: WF-P7600 vs Competing POS Android Boards
The boards competing with the WF-P family in France tend to be single-platform designs. That is the root of three of the four differences below.
- Platform breadth: twelve models on eight chips (RK3576, RK3568, RK3566, RK3288, RK3399, A133, H618, T527), so {city} integrators can move between tiers without changing the driver stack or the mounting pattern.
- Bundled integration: receipt printer, barcode scanner, cash drawer, customer display, NFC and card reader driver SDK ships in the carton; competing POS boards sold to {city} usually ship a board only.
- Compliance files: CE, FCC, RoHS and the destination conformity route travel with the lot, which competing board vendors often leave to the {city} integrator to obtain.
- Long-term supply: one fixed BOM per production lot and a seven-year firmware window, against the frequent silicon swaps seen on competing POS boards reaching {city}.
Global POS Terminal and Smart Checkout Market Trends
The global POS payment terminal market was valued at about USD 123.15 billion in 2025 and is projected to reach roughly USD 215.45 billion by 2032, a compound annual growth rate near 8.25 percent, with the Asia Pacific region holding the largest share. For a Lyon integrator that growth translates into a replacement cycle rather than a one-off project, and the board has to be specified for the third refresh, not the first.
- Entry counter tier: WF-P7600 covers single-screen checkout and small format stores, where the brief is a reliable 1080p panel, a receipt printer and a cash drawer on one board.
- Dual-screen mainstream tier: WF-P3600 drives the cashier screen and the customer display independently, which is the configuration most restaurant and supermarket rollouts standardise on.
- AI and unattended tier: WF-P3601 carries the NPU, the wide temperature window and the watchdog behaviour that face payment counters and outdoor cabinets require.
The France market will keep absorbing Android POS boards for the rest of the decade. The question for Lyon buyers is whether the board underneath the terminal is built to be re-ordered.
Partner Success Story: Nordweg Kasse Systemer (convenience chain POS integrator)
A recent Nordweg Kasse Systemer deployment in the Nordic convenience retail segment shows how the WF-P POS Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand, supports Lyon integrators. Nordweg Kasse Systemer deployed 83700 WF-P boards across 140 convenience counters.
- OEM relationship: AndroidSBC private-label SKU shipped with Nordweg Kasse Systemer branding and CE / FCC / RoHS files bundled.
- Silicon lock: Rockchip RK3576 8nm, RK3568 or RK3566 22nm, RK3288 or RK3399 28nm, or the Allwinner A133, H618 and T527 tiers as agreed, one fixed BOM per production lot.
- Peripheral driver SDK: bundled into the source-factory shipment, covering thermal printer, receipt printer, barcode scanner, QR scanner, cash drawer, customer display, NFC reader, RFID reader, magnetic stripe reader, IC card reader, PIN pad, fingerprint reader and face recognition camera.
- Unattended-operation tools: hardware watchdog, RTC, scheduled power cycling, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback bundled.
- Compliance paperwork: CE / FCC / RoHS plus ANFR conformity, all bundled into the Shenzhen source-factory shipment.
Nordweg Kasse Systemer Technical Director for Nordic Convenience Retail highlighted: Nordweg Kasse Systemer picked the WF-P board because the receipt printer and the cash drawer fired correctly on the sample unit, and 83700 boards went into the Lyon estate without a driver change.
Field Report: dual-screen checkout lane rollout at a regional supermarket group
LONGGANG, September 23, 2026 - Deng Hui, AndroidSBC field desk. On the bench at Longgang the WF-P7600 drove the cashier panel, the customer display and the receipt printer simultaneously for the full burn-in window before the France lot was released. The WF-P7600 POS Android motherboard order for Lyon, France cleared the burn-in station on schedule and is en route via the Marseille - Shanghai lane.
The WF-P7600 dual-screen POS terminal with cashier and customer display production lot includes the WF-P7600-A variant as the typical configuration, with receipt printer, barcode scanner and cash drawer driver SDK plus staged OTA management bundled into the source-factory shipment. For France integrators, the ANFR conformity plus CE marking with ANFR radio interface registration paperwork is bundled.
Filed by Deng Hui, AndroidSBC field desk, LONGGANG. French chains ask for the NF525 fiscal certification trail and French receipt wording, and they audit the log retention behaviour during the pilot.
WF-P7600 Application Scenarios
The WF-P7600 dual-screen POS terminal with cashier and customer display sits inside a twelve-variant WF-P POS Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-P7600-A configuration is the typical build for the supermarket checkout lane rollout use case, with receipt printer, scanner and cash drawer driver SDK plus staged OTA management bundled.
- Supermarket and hypermarket checkout: the WF-P7600 drives the cashier screen while the second lane carries the customer display or the promotion wall in Lyon.
- Convenience and small format stores: the WF-P3602 fits a narrow counter with a receipt printer, a barcode scanner and a cash drawer on one board.
- Restaurants and quick service: the WF-P3566 runs the order screen plus a kitchen display output, with the customer display showing the order total.
- Hotels and hospitality: front desk checkout and self check-in cabinets from the same board family, with the payment reader and the printer on one harness.
- Unattended retail and vending: the WF-P3288 holds a 7x24 duty cycle in a cabinet with no staff to reset it.
- Fuel forecourts and parking: the WF-P3399 runs the outdoor payment cabinet, where the wide temperature window and the watchdog matter more than raw CPU.
- Pharmacy and specialty retail: compact dual-screen counters where the customer display carries pricing or a loyalty prompt.
- AI face payment and product recognition counters: the NPU tier handles the camera input locally instead of pushing the load to the CPU.
- Retrofit programmes in Lyon: the same board re-uses the existing enclosure, panel and counter harness, so an installed estate can be upgraded lane by lane.
Partnership Models for Lyon Buyers
For France importers the track choice changes the paperwork, not the board. The three options below are the standard ones.
- Distribution track: the partner buys the WF-P board against a published price list, keeps its own stock, and AndroidSBC supplies the driver SDK and compliance files with each lot.
- Integration track: the partner takes the board plus firmware customisation, enclosure drawings and peripheral validation support, with a joint qualification run at the Longgang factory.
- Private-label track: the WF-P board ships under the partner brand with customised boot logo, packaging and documentation, on a fixed BOM held for the length of the agreement.
Every track is open to Lyon importers, distributors, system integrators and brand owners, with the same 1-3 day sample lead.
Frequently Asked Questions
Does the WF-P POS Android motherboard family support a dual-screen POS terminal with cashier and customer?
Answer: Supported. dual-screen POS terminal with cashier and customer is part of the standard WF-P configuration set, and the board ships to Lyon with the drivers and the firmware baseline already matched.
Which silicon tiers are available in the WF-P family for France buyers?
Answer: The family covers eight platforms from the RK3576 octa-core tier down to the A133 entry tier. The RK3576 board in this configuration is supported for seven years from release.
Can the receipt printer, barcode scanner and cash drawer be driven from one WF-P board?
Answer: One board handles all four. The driver SDK ships in the carton covering thermal printer, receipt printer, barcode scanner, QR scanner, cash drawer, customer display, NFC, RFID, magnetic stripe, IC card, PIN pad and fingerprint reader.
What is the minimum order quantity and the sample lead time for France?
Answer: For Lyon buyers the entry point is a single sample board on a 1-3 day lead. Volume follows a 15-30 day production slot, booked against an allocation rather than quoted spot.
Is custom ROM, boot logo or pre-installed app development available?
Answer: Yes - custom ROM, boot logo, boot animation, pre-installed applications and UI work are all available, and the customised image becomes the reference build for later lots.
How are firmware updates delivered to a France estate after deployment?
Answer: Firmware is delivered over the network or by USB, with a staged release and a rollback path. AndroidSBC commits to a seven-year update window on the WF-P family.
What shipping terms does AndroidSBC support for France orders?
Answer: AndroidSBC quotes FOB Shenzhen, CIF and EXW, and handles export customs clearance and global shipping. The Lyon partner books the lane that suits the import process.
What happens if a board fails in the field in France?
Answer: The RMA path uses the board serial number to identify the production lot, then replaces from stock held for the Lyon programme so the lane is not down for a full lead time.
Contact AndroidSBC: Start Your WF-P7600 Sourcing Conversation
For the WF-P POS Android motherboard family, AndroidSBC, a Wanlin Manufacturing Group export brand, opens the following channels to Lyon integrators:
- Email: Androidsbc@163.com
- Export service hotline: +8613261677119
- Website: https://www.androidsbc.com
- Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China
A 1-3 day sample lead applies to France buyers and a 15-30 day mass-production lead to bulk orders. AndroidSBC, a Wanlin Manufacturing Group export brand, commits to a seven-year firmware update window on the WF-P family.
