TL;DR: Government Hall Query Payment Board
AndroidSBC supply desk: LPDDR4X and eMMC allocations locked for the WF-K query board family serving Lyon, France. The WF-K6180 self-service query terminal Android motherboard spans the information playback and query kiosk and eleven sister models in the WF-K series, all built on the H618 quad-core ARM Cortex-A53 1.5GHz SoC with the ARM Mali-G31 MP2 GPU, single 4K output plus LVDS, and Android 12 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-K family from the Longgang source factory in Shenzhen to Lyon and France importers who run hospital information points, bank branch lobbies, government service halls, mall directory stations, airport concourses and outdoor query cabinets.
About AndroidSBC and the Self-Service Query Terminal Android Motherboard Family
AndroidSBC is the export brand of Wanlin Manufacturing Group, a Shenzhen board maker that runs self-service query terminal Android motherboard production on its own Longgang lines. The WF-K series covers twelve models across eight silicon tiers, from the RK3588 flagship down to the entry A133 part, so a Lyon buyer can size a query terminal project without changing suppliers halfway through. The factory ships to France on a factory-direct basis, with the driver SDK, compliance files and mounting drawings bundled into the same carton as the boards.
WF-K6180 Technical Specifications
| Parameter | AndroidSBC WF-K6180 (information playback and query kiosk) | Industry Average |
|---|---|---|
| Processor | H618 quad-core ARM Cortex-A53 1.5GHz SoC | Older 28nm or 40nm quad-core SoC |
| Process node | 28nm | Older 28nm or 40nm process |
| GPU | Mali-G31 MP2 | Older Mali-450 or basic GPU |
| NPU / AI | none | No NPU on competing entry boards |
| Memory | 2GB LPDDR4 | DDR3 1GB / 2GB on competing boards |
| Storage | 16GB eMMC | eMMC 5.0 8GB / 16GB on competing boards |
| Display output | single 4K output plus LVDS | Single HDMI 1080p only on competing boards |
| Touch support | 10-point capacitive touch | Resistive single-touch on competing boards |
| Operating system | Android 12 | Android 8 or Android 9 on competing boards |
| Connectivity | WiFi 5 plus Bluetooth 5.0 plus Gigabit Ethernet | WiFi 4 plus 10/100M Ethernet on competing boards |
| Query peripherals | Capacitive touch, thermal printer, document scanner, card reader | No bundled touch, printer or scanner driver SDK on competing boards |
| Operating temperature | 0C to 50C | 0C to 40C on competing boards |
All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-K6180 (information playback and query kiosk) maintains its 4K HDMI output plus capacitive touch sampling while running the burn-in test loop, a configuration that competing single-platform boards cannot sustain at 60fps. For France importers sourcing the WF-K family, the WF-K6180-A variant is the typical configuration for the mall and venue information playback rollout use case, with a sustained weekly capacity of 5000 pcs/wk.
Challenges in Sourcing Self-Service Query Terminal Android Motherboards for France Buyers
A France rollout exposes board weaknesses quickly: a query terminal that works in a climate-controlled showroom in Lyon may not survive an unheated entrance lobby or an outdoor transit plaza.
Then comes documentation. A Lyon importer needs the ANFR evidence trail behind CE marking with ANFR radio interface registration to clear customs in France without holding the shipment at Port of Marseille for paperwork reasons. For Lyon the outcome is a repeatable 124500-unit batch, confirmed on September 22, 2026, with the Marseille - Shanghai lane booked ahead so France sites are not waiting on logistics.
Competitive Comparison: WF-K6180 vs Competing Self-Service Query Terminal Android Boards
The table below puts the WF-K self-service query terminal board against what a Lyon integrator typically finds on competing query boards sold into France.
- Platform breadth: twelve models on eight chips (RK3588, RK3568, RK3566, RK3288, RK3399, A133, H618, T527), so {city} integrators can move between tiers without changing driver stack or mounting pattern.
- Bundled integration: touch, printer, scanner, card reader, camera and voice driver SDK ships in the carton; competing query boards sold to {city} usually ship a board only.
- Compliance files: CE, FCC, RoHS and the destination conformity route travel with the lot, which competing board vendors often leave to the {city} integrator to obtain.
- Long-term supply: one fixed BOM per production lot and a seven-year firmware window, against the frequent silicon swaps seen on competing query boards reaching {city}.
Global Self-Service Query Terminal / Information Kiosk Market Trends
Growth in the query terminal segment is being driven by labour economics as much as by technology. In France the information playback and query kiosk lets operators cover longer hours with the same headcount, and Lyon projects are typically justified on exactly that basis.
- Volume shift to board-level sourcing: more integrators now buy the motherboard rather than the finished kiosk, which is why the WF-K6180 and WF-K3602 tiers ship in board form with the enclosure left to the local partner.
- Dual-screen becomes the default: hall display plus touch query on one board is replacing two separate devices, and the WF-K3602 and WF-K3566 configurations address that pattern directly.
- Longer service life expectations: operators now plan five to seven years per query terminal, which favours a fixed BOM such as the WF-K3566 over boards that re-spin silicon between lots.
For Lyon integrators the implication is straightforward. Competing on the query terminal itself is difficult; competing on the integration package that reaches France is where margin survives.
Partner Success Story: Nordweg Innbyggertorg (municipal citizen service operator)
The Nordweg Innbyggertorg case in the Nordic public service segment is a working example of how the WF-K family from AndroidSBC supports Lyon integrators. Nordweg Innbyggertorg deployed 124500 compact query terminals across municipal service points.
- OEM relationship: AndroidSBC private-label SKU shipped with Nordweg Innbyggertorg branding and CE / FCC / RoHS files bundled.
- Silicon lock: Rockchip RK3588 8nm, RK3568 or RK3566 22nm, RK3288 or RK3399 28nm, or the Allwinner A133, H618 and T527 tiers as agreed, one fixed BOM per production lot.
- Peripheral driver SDK: bundled into the source-factory shipment, covering capacitive touch, thermal printer, receipt printer, document scanner, A4 printer, barcode scanner, QR code, NFC, RFID, card reader, ID reader, face recognition, voice module, speaker amplifier and microphone.
- Unattended-operation tools: hardware watchdog, RTC, scheduled power cycling, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback bundled.
- Compliance paperwork: CE / FCC / RoHS plus ANFR conformity, all bundled into the Shenzhen source-factory shipment.
Nordweg Innbyggertorg Programme Director for Nordic Public Service noted: Nordweg Innbyggertorg replaced counter-side lookup binders with the WF-K compact board, and 124500 units went into Lyon service points without any change to the existing counter furniture.
Field Report: information playback and query rollout at a shopping mall atrium
YANTIAN, Shenzhen, September 22, 2026 - Chu Lin, AndroidSBC field desk. The WF-K6180 units were packed with the printer and scanner drivers pre-integrated, cutting the on-site configuration load for France teams. The WF-K6180 self-service query terminal Android motherboard order for Lyon, France cleared the burn-in station on schedule and is en route via the Marseille - Shanghai lane.
The WF-K6180 information playback and query kiosk production lot includes the WF-K6180-A variant as the typical configuration, with touch panel, thermal printer and document scanner driver SDK plus staged OTA management bundled into the source-factory shipment. For France integrators, the ANFR conformity plus CE marking with ANFR radio interface registration paperwork is bundled.
Filed by Chu Lin, AndroidSBC field desk, YANTIAN, Shenzhen. French service halls combine a touch query terminal at the entrance with a high-brightness information display in the same lobby.
WF-K6180 Application Scenarios
The WF-K6180 information playback and query kiosk sits inside a twelve-variant WF-K self-service query terminal Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-K6180-A configuration is the typical build for the mall and venue information playback rollout use case, with touch panel and identity peripheral driver SDK plus staged OTA management bundled.
- Hospital and clinic information points: the WF-K6180 drives a touch query station at the entrance while the hall display shows the same information set to waiting visitors in Lyon.
- Bank and financial branch lobbies: touch query plus counter display from one board, with card reader and ID reader integrated for account and product lookups.
- Government service halls: the WF-K3288 runs tax, social security and real estate information lookup, with printing available on the same board.
- Shopping mall directories: the WF-K3399 serves mall directory and wayfinding lookup, with the advertising screen running an independent content loop.
- Airport and train station concourses: high-brightness information query where the WF-K1330 has to stay readable under strong ambient light.
- Retail and pharmacy price or product lookup: compact stations where the WF-K1331 fits a narrow counter without structural work.
- Outdoor and unheated information cabinets: the industrial tier holds the wide temperature window and 7x24 duty cycle for street-level query points.
- Multi-language public information points: on-screen lookup in more than one language from a single board, with voice assistance where the venue requires it.
- Retrofit programmes in Lyon: the same board re-uses the existing enclosure, panel and mounting pattern so an installed estate can be upgraded board by board.
Partnership Models for Lyon Buyers
Three tracks are open to Lyon integrators, and the difference between them is where the France partner wants to add its own value.
- Distribution track: the partner buys the WF-K board against a published price list, keeps its own stock, and AndroidSBC supplies the driver SDK and compliance files with each lot.
- Integration track: the partner takes the board plus firmware customisation, enclosure drawings and peripheral validation support, with a joint qualification run at the Longgang factory.
- Private-label track: the WF-K board ships under the partner brand with customised boot logo, packaging and documentation, on a fixed BOM held for the length of the agreement.
In practice France partners start on the distribution track, add the integration track once volumes justify it, and move to private label when Lyon brand recognition matters more than margin per unit.
Frequently Asked Questions
Does the WF-K self-service query terminal Android motherboard family support an information playback and query kiosk?
Answer: Yes, and it is qualified on the same production line as the rest of the family. The information playback and query kiosk runs on the WF-K baseline image that France buyers receive, so there is no separate integration project.
What is the real difference between the H618 tier and the other silicon tiers in the WF-K family?
Answer: The H618 tier sits at a specific point on the price-versus-headroom curve. Below it the boards suit single-screen information lookup; above it they support dual-screen independent display and heavier video work, and AndroidSBC documents that mapping for Lyon buyers.
Can AndroidSBC handle CE / FCC / UKCA / RoHS / REACH paperwork for France?
Answer: Yes. Compliance files for France are bundled into the source-factory shipment to Lyon, and AndroidSBC provides the underlying test reports as well as the certificates on request.
What are the MOQ and lead time for a first order of the WF-K self-service query terminal family?
Answer: For Lyon the entry MOQ is low enough to validate one site before committing to an estate, with 1-3 day samples and a 15-30 day first bulk lead time for France.
Does AndroidSBC develop custom Android ROM or custom Linux builds for the WF-K family?
Answer: Yes. Custom ROM work on the WF-K family is scoped per Lyon project rather than sold as a generic service, which keeps the France deliverable tied to a specific deployment.
How are software updates and long-term support handled on the WF-K family?
Answer: Software updates on the WF-K family are staged rather than immediate, with rollback available at each step, which matters when a Lyon estate is live and France sites cannot tolerate an unplanned outage.
Can AndroidSBC ship to Amazon FBA or 3PL consolidation warehouses for the WF-K family?
Answer: Yes. Boards for Lyon can be routed straight into Amazon FBA or a third-party 3PL in France, with the labelling and packing specification confirmed before the lot is packed.
How are RMA and DOA replacements handled on the WF-K self-service query terminal family?
Answer: RMA and DOA units are handled against the production lot, since every WF-K board is logged against its firmware revision and burn-in result before it leaves Shenzhen. Lyon partners report against the lot number and AndroidSBC matches it to the rig log.
Contact AndroidSBC: Start Your WF-K6180 Sourcing Conversation
AndroidSBC, a Wanlin Manufacturing Group export brand, opens the following channels for the WF-K self-service query terminal family. Lyon integrators can reach the export desk through:
- Email: Androidsbc@163.com
- Export service hotline: +8613261677119
- Website: https://www.androidsbc.com
- Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China
A 1-3 day sample lead applies to France buyers and a 15-30 day mass-production lead to bulk orders. AndroidSBC commits to a seven-year firmware update window on the WF-K family.
