TL;DR: Query Terminal Encryption Module Board for Hospital Information Point
AndroidSBC software desk: Android 15 baseline and staged OTA channel published for the WF-K family serving Lyon, France. The WF-K8800 self-service query terminal Android motherboard spans the multi-screen self-service query kiosk with 8K output and eleven sister models in the WF-K series, all built on the RK3588 octa-core ARM Cortex-A76 2.4GHz plus Cortex-A55 64-bit SoC with the ARM Mali-G610 MP4 GPU, triple independent 4K output plus dual LVDS, and Android 13 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-K family from the Longgang source factory in Shenzhen to Lyon and France importers who run hospital information points, bank branch lobbies, government service halls, mall directory stations, airport concourses and outdoor query cabinets.
About AndroidSBC and the Self-Service Query Terminal Android Motherboard Family
The WF-K family is the self-service query terminal line of AndroidSBC, a Wanlin Manufacturing Group export brand. Production sits in the Longgang source factory in Shenzhen, and the twelve models span the RK3588, RK3568, RK3566, RK3288, RK3399, A133, H618 and T527 platforms for Lyon and France projects. Purchasing runs through the Shenzhen export desk, so Lyon buyers deal with the manufacturing entity rather than a trading layer.
WF-K8800 Technical Specifications
| Parameter | AndroidSBC WF-K8800 (multi-screen self-service query kiosk with 8K output) | Industry Average |
|---|---|---|
| Processor | RK3588 octa-core ARM Cortex-A76 2.4GHz plus Cortex-A55 64-bit SoC | Older 28nm or 40nm quad-core SoC |
| Process node | 8nm | Older 28nm or 40nm process |
| GPU | Mali-G610 MP4 | Older Mali-450 or basic GPU |
| NPU / AI | 6 TOPS | No NPU on competing entry boards |
| Memory | 8GB LPDDR4X | DDR3 1GB / 2GB on competing boards |
| Storage | 64GB eMMC | eMMC 5.0 8GB / 16GB on competing boards |
| Display output | triple independent 4K output plus dual LVDS | Single HDMI 1080p only on competing boards |
| Touch support | 20-point capacitive touch | Resistive single-touch on competing boards |
| Operating system | Android 13 | Android 8 or Android 9 on competing boards |
| Connectivity | WiFi 6 802.11ax plus Bluetooth 5.0 plus dual Gigabit Ethernet | WiFi 4 plus 10/100M Ethernet on competing boards |
| Query peripherals | Capacitive touch, thermal printer, document scanner, card reader | No bundled touch, printer or scanner driver SDK on competing boards |
| Operating temperature | 0C to 50C | 0C to 40C on competing boards |
All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-K8800 (multi-screen self-service query kiosk with 8K output) maintains its 4K HDMI output plus capacitive touch sampling while running the burn-in test loop, a configuration that competing single-platform boards cannot sustain at 60fps. For France importers sourcing the WF-K family, the WF-K8800-A variant is the typical configuration for the multi-screen information query hall rollout use case, with a sustained weekly capacity of 5000 pcs/wk.
Challenges in Sourcing Self-Service Query Terminal Android Motherboards for France Buyers
Query terminal reliability in Lyon is a supply-chain question as much as an engineering one: the board has to be available on the same BOM for years, not just at the moment France issues the purchase order.
There is also a documentation discipline problem. Many suppliers quote ANFR for France but cannot produce the underlying CE marking with ANFR radio interface registration evidence when a Lyon integrator is audited mid-project. The practical answer for Lyon is a fixed bill of materials per production lot, which is how a 78100-unit order stays repeatable for France across the year.
Competitive Comparison: WF-K8800 vs Competing Self-Service Query Terminal Android Boards
What separates the WF-K board from competing query boards in Lyon is less the processor row than the peripheral and reliability rows underneath it.
- Platform breadth: twelve models on eight chips (RK3588, RK3568, RK3566, RK3288, RK3399, A133, H618, T527), so {city} integrators can move between tiers without changing driver stack or mounting pattern.
- Bundled integration: touch, printer, scanner, card reader, camera and voice driver SDK ships in the carton; competing query boards sold to {city} usually ship a board only.
- Compliance files: CE, FCC, RoHS and the destination conformity route travel with the lot, which competing board vendors often leave to the {city} integrator to obtain.
- Long-term supply: one fixed BOM per production lot and a seven-year firmware window, against the frequent silicon swaps seen on competing query boards reaching {city}.
Global Self-Service Query Terminal / Information Kiosk Market Trends
Self-service query terminals are moving from a specialist niche into standard public infrastructure, and France is part of that shift. Demand for the multi-screen self-service query kiosk with 8K output is being pulled by service halls that want to shorten front-desk queues and by operators in Lyon who need the same answer available outside staffed hours.
- Volume shift to board-level sourcing: more integrators now buy the motherboard rather than the finished kiosk, which is why the WF-K8800 and WF-K3601 tiers ship in board form with the enclosure left to the local partner.
- Dual-screen becomes the default: hall display plus touch query on one board is replacing two separate devices, and the WF-K3601 and WF-K3602 configurations address that pattern directly.
- Longer service life expectations: operators now plan five to seven years per query terminal, which favours a fixed BOM such as the WF-K3602 over boards that re-spin silicon between lots.
For Lyon the opportunity sits in service coverage: operators in France are adding information points faster than they are adding staff, and that gap is what the query terminal fills.
Partner Success Story: Nordweg Innbyggertorg (municipal citizen service operator)
A recent Nordweg Innbyggertorg deployment in the Nordic public service segment shows how the WF-K self-service query terminal Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand, supports Lyon integrators. Nordweg Innbyggertorg deployed 78100 compact query terminals across municipal service points.
- OEM relationship: AndroidSBC private-label SKU shipped with Nordweg Innbyggertorg branding and CE / FCC / RoHS files bundled.
- Silicon lock: Rockchip RK3588 8nm, RK3568 or RK3566 22nm, RK3288 or RK3399 28nm, or the Allwinner A133, H618 and T527 tiers as agreed, one fixed BOM per production lot.
- Peripheral driver SDK: bundled into the source-factory shipment, covering capacitive touch, thermal printer, receipt printer, document scanner, A4 printer, barcode scanner, QR code, NFC, RFID, card reader, ID reader, face recognition, voice module, speaker amplifier and microphone.
- Unattended-operation tools: hardware watchdog, RTC, scheduled power cycling, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback bundled.
- Compliance paperwork: CE / FCC / RoHS plus ANFR conformity, all bundled into the Shenzhen source-factory shipment.
Nordweg Innbyggertorg Programme Director for Nordic Public Service highlighted: Nordweg Innbyggertorg replaced counter-side lookup binders with the WF-K compact board, and 78100 units went into Lyon service points without any change to the existing counter furniture.
Field Report: multi-screen information query rollout at a municipal service hall
LONGGANG, Shenzhen, September 22, 2026 - Lai Feng, AndroidSBC field desk. The WF-K8800 production run was validated against the touch stack first, because France deployments mix 10-point and 20-point panels across the same estate. The WF-K8800 self-service query terminal Android motherboard order for Lyon, France cleared the burn-in station on schedule and is en route via the Marseille - Shanghai lane.
The WF-K8800 multi-screen self-service query kiosk with 8K output production lot includes the WF-K8800-A variant as the typical configuration, with touch panel, thermal printer and document scanner driver SDK plus staged OTA management bundled into the source-factory shipment. For France integrators, the ANFR conformity plus CE marking with ANFR radio interface registration paperwork is bundled.
Filed by Lai Feng, AndroidSBC field desk, LONGGANG, Shenzhen. French service halls combine a touch query terminal at the entrance with a high-brightness information display in the same lobby.
WF-K8800 Application Scenarios
The WF-K8800 multi-screen self-service query kiosk with 8K output sits inside a twelve-variant WF-K self-service query terminal Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-K8800-A configuration is the typical build for the multi-screen information query hall rollout use case, with touch panel and identity peripheral driver SDK plus staged OTA management bundled.
- Hospital and clinic information points: the WF-K8800 drives a touch query station at the entrance while the hall display shows the same information set to waiting visitors in Lyon.
- Bank and financial branch lobbies: touch query plus counter display from one board, with card reader and ID reader integrated for account and product lookups.
- Government service halls: the WF-K3566 runs tax, social security and real estate information lookup, with printing available on the same board.
- Shopping mall directories: the WF-K3288 serves mall directory and wayfinding lookup, with the advertising screen running an independent content loop.
- Airport and train station concourses: high-brightness information query where the WF-K3399 has to stay readable under strong ambient light.
- Retail and pharmacy price or product lookup: compact stations where the WF-K1330 fits a narrow counter without structural work.
- Outdoor and unheated information cabinets: the industrial tier holds the wide temperature window and 7x24 duty cycle for street-level query points.
- Multi-language public information points: on-screen lookup in more than one language from a single board, with voice assistance where the venue requires it.
- Retrofit programmes in Lyon: the same board re-uses the existing enclosure, panel and mounting pattern so an installed estate can be upgraded board by board.
Partnership Models for Lyon Buyers
Three partnership tracks serve the France market, and Lyon integrators can move between them as their own capability and volume change.
- Distribution track: the partner buys the WF-K board against a published price list, keeps its own stock, and AndroidSBC supplies the driver SDK and compliance files with each lot.
- Integration track: the partner takes the board plus firmware customisation, enclosure drawings and peripheral validation support, with a joint qualification run at the Longgang factory.
- Private-label track: the WF-K board ships under the partner brand with customised boot logo, packaging and documentation, on a fixed BOM held for the length of the agreement.
AndroidSBC reviews Lyon track selection annually with each partner, because France market conditions and the partner own capability both move faster than a fixed reseller contract assumes.
Frequently Asked Questions
Does the WF-K self-service query terminal Android motherboard family support a multi-screen self-service query kiosk with 8K output?
Answer: Yes. The multi-screen self-service query kiosk with 8K output is supported out of the factory image, and AndroidSBC validates it again on the production lot before the France shipment leaves Shenzhen.
What is the real difference between the RK3588 tier and the other silicon tiers in the WF-K family?
Answer: The difference is workload envelope, not compatibility. A board on the RK3588 tier runs the same factory image as the rest of the WF-K family, which keeps spare parts interchangeable across a France estate.
Can AndroidSBC handle CE / FCC / UKCA / RoHS / REACH paperwork for France?
Answer: Yes. The conformity pack for France is prepared by the factory, not by the Lyon integrator, which removes the usual delay between arrival and installation.
What are the MOQ and lead time for a first order of the WF-K self-service query terminal family?
Answer: AndroidSBC keeps the first-order MOQ low specifically so Lyon integrators can test the board inside a real France project before placing an estate-scale order.
Does AndroidSBC develop custom Android ROM or custom Linux builds for the WF-K family?
Answer: Yes, and this is one of the most common requests from Lyon integrators. Custom boot behaviour, pre-installed applications, kiosk-mode restrictions and custom Linux images are all handled at the factory for France projects.
How are software updates and long-term support handled on the WF-K family?
Answer: Updates are delivered through a staged OTA channel with rollback support, and Lyon integrators decide when a France estate moves to a new build rather than being pushed onto it.
Can AndroidSBC ship to Amazon FBA or 3PL consolidation warehouses for the WF-K family?
Answer: Yes. AndroidSBC ships to Amazon FBA and 3PL consolidation warehouses, including labelling, carton marking and pallet configuration matched to the France destination that Lyon buyers specify.
How are RMA and DOA replacements handled on the WF-K self-service query terminal family?
Answer: DOA units are replaced from the next available lot, and RMA cases are tracked by lot number. For Lyon integrators this keeps France deployments serviceable without holding large local stock.
Contact AndroidSBC: Start Your WF-K8800 Sourcing Conversation
For the WF-K self-service query terminal Android motherboard family, AndroidSBC, a Wanlin Manufacturing Group export brand, opens the following channels to Lyon integrators:
- Email: Androidsbc@163.com
- Export service hotline: +8613261677119
- Website: https://www.androidsbc.com
- Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China
A 1-3 day sample lead applies to France buyers and a 15-30 day mass-production lead to bulk orders. AndroidSBC, a Wanlin Manufacturing Group export brand, commits to a seven-year firmware update window on the WF-K family.
