RK3588 Custom M.2 Expansion Board, WF-C3588-A0, AndroidSBC, Lyon

TL;DR: RK3588 Custom M.2 Expansion Board

Lyon, France - September 12, 2026. A 13,700-unit consignment of WF-C3588-A0 boards left the Wanlin Longgang source factory for Lyon this week, the 296th production lot released on the Rockchip RK3588 line.

AndroidSBC customs and certification briefing for Rockchip RK3588 custom board shipments serving Lyon, France. AndroidSBC is opening the full WF-C3588 custom motherboard programme to France: nine variants on the Rockchip RK3588 platform with 6 TOPS NPU, 8K H.265 decode, dual Gigabit Ethernet and up to 32GB of LPDDR5. Every variant ships from the Wanlin Longgang facility with OEM branding available, ODM carrier design handled in-house, and per-lot CE, FCC, UKCA, RoHS and IEC 62368-1 documentation.

About AndroidSBC and the Rockchip RK3588 Board Family

Wanlin Manufacturing Group has been building custom Android and Linux boards in Shenzhen since 2013, and AndroidSBC is the group's export-facing brand. The WF-C3588 is the current custom motherboard programme: nine variants on the same Rockchip RK3588 octa-core 8nm silicon with 6 TOPS NPU, 8K H.265 decode, dual Gigabit Ethernet and up to 32GB of LPDDR5. Everything is produced at the Longgang facility, which runs its own SMT lines, burn-in racks and EMC pre-compliance bench. Lyon and France buyers typically come to the WF-C3588 for one of three reasons: nine custom categories on one silicon, a source factory that takes OEM and ODM work seriously, or a supplier that carries the certification paperwork instead of leaving it to the importer.

WF-C3588-A0 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-C3588-A0 (Custom Android Motherboard for OEM and ODM Projects) holds its display output and its decoder load at the same time through the burn-in loop, a combination that the legacy boards in the comparison column cannot sustain. For France importers sourcing the WF-Series, the 8GB + 64GB (WF-C3588-A0-B) variant is the typical configuration for the custom Android motherboard programmes use case, with a sustained weekly capacity of 5,000 pcs/wk on the Longgang line.

Challenges in Sourcing Custom Android Motherboard for OEM and ODM Projects for France Buyers

What breaks France sourcing plans on the custom android motherboard for oem and odm projects line is not price negotiation, it is the second shipment. The Rockchip RK3588 has to be allocated at wafer level, and the brokers quoting fastest are usually the ones with the least control over that allocation. The software side is the second exposure. A board that boots on the bench is not the same as a board that carries the certified stack a France channel will accept, and the difference usually shows up during inbound inspection rather than at the factory gate.

Then there is the certification file. A stamp is cheap; a Technical File with notified-body reports dated inside twelve months is not, and the difference only matters when a France customs officer asks for it. AndroidSBC closes the loop at the source factory: custom configuration assembled, certified image burned, burn-in barcode attached per unit, Technical File issued with the lot. The nine WF-C3588 variants cover custom Android motherboards, GMS-certified smart displays, commercial tablets, smart mirrors, OTT boxes, conference panels, smart home hubs, in-vehicle displays, and white-label Android terminals and each ships in three memory configurations, so most Lyon requirements can be met from standard stock rather than a from-scratch run.

For France specifically, the file travels with the goods. In France ANFR radio registration is separate from the CE marking, and buyers normally ask for both before releasing a purchase order. AndroidSBC prepares the CE marking with ANFR radio interface registration documentation for ANFR, attaches the standard multi-market pack (CE, FCC, UKCA, RoHS, REACH), and consigns the lot to Port of Le Havre on the Le Havre to Yantian lane.

Competitive Comparison: WF-C3588-A0 vs Competing RK3588 Boards

The boards competing for the same socket in the custom android motherboard for oem and odm projects segment fall into three groups: off-the-shelf catalogue boards with no customization path, re-badged imports where the seller controls neither PCB nor firmware, and source-factory custom platforms with an engineering desk behind them. The WF-C3588-A0 sits in the third group and adds three things: Rockchip RK3588 silicon, an I/O and thermal profile that survives a continuous decode-and-NPU loop, and the per-lot certified image burn at Longgang.

• vs off-the-shelf Android boards: the WF-C3588-A0 starts from a reference design and takes custom memory, storage, display and firmware lines without an NRE penalty on standard variants.
• vs re-badge resellers: AndroidSBC controls the PCB, the PCBA line and the BSP, so a custom I/O change is a factory engineering change rather than a request passed to a third party.
• vs generic AOSP vendors: the GMS, EDLA and CTS track is pre-walked on RK3588 at the Longgang plant, which removes the certification loop that stalls most custom Android launches.
• vs short-line brokers: the seven-year supply commitment on the RK3588 platform is written into the framework agreement, not left as a verbal assurance.

Global Custom Android Motherboard and Smart Display Market Trends

The Custom Android Motherboard and Smart Display market sets the pace for Lyon procurement this year, and it does not move on its own. The Edge AI hardware segment that MarketsandMarkets values at USD 26.9 billion in 2025, with a 32.7 percent CAGR reaching USD 108.2 billion by 2030 (MarketsandMarkets, Edge AI Hardware Market Report, 2025-2030), sets the silicon allocation backdrop that custom RK3588 motherboard buyers also compete for. Three patterns stand out in the WF-C3588 order book for France:

• GMS-certified smart display: a white-label Android display brand takes the board with GMS, Widevine L1 and a locked launcher for a retail estate rollout.
• Display and signage refresh cycles: a longer content loop and a higher panel resolution now define the refresh trigger. The WF-C3588-A0 board carries that headroom without a board change.
• Smart mirror and hospitality: a hospitality supplier loads a mirror UI on the MIPI-DSI path with the 6 TOPS NPU running on-device voice wake.

The Custom Android Motherboard and Smart Display commentary has shifted from unit growth to supply reliability, and that shift favours suppliers who control their own SMT and burn-in lines.

The common thread in France is that single orders are being replaced by blanket agreements with a monthly release, because a custom board programme that has to survive a twelve-month window cannot absorb an allocation gap in the middle of it.

Partner Success Story: Vantage Retail Group in Lyon, France

Vantage Retail Group, a retail technology integrator serving the France market, deployed 11,600 custom WF-C3588-K4 POS boards for a checkout modernisation programme. The rollout covered the gms-certified smart display, smart mirror and hospitality, and smart home hub workloads, with AndroidSBC handling the burn-in, the certification scope, and the palletisation at the Wanlin Longgang plant.

• Deployed: 11,600 custom WF-C3588-K4 POS boards for a checkout modernisation programme
• Region: Lyon, France
• Models used: WF-C3588-A0 (lead SKU), plus eight sibling custom RK3588 board variants in the same platform family
• Certifications handled: CE, FCC, UKCA, RoHS, REACH, IEC 62368-1, EN 55032, EN 55035, plus optional UL 60950-1, GMS, Widevine L1 and Dolby Audio per variant
• Logistics: FOB Shanghai Yangshan with the Wanlin Group Longgang source factory named on the export declaration, entering Port of Le Havre via the Le Havre to Yantian lane

"One board class across the register, the scanner bank and the payment terminal. The OEM tier put our logo on the silk and our software in the image, and the MOQ matrix let us phase the rollout by region without re-negotiating."

- Sarah Chen, VP Sourcing

Field Report: container yard at Yantian, where 13,700 WF-C3588-A0 boards from the Wanlin export base are being loaded onto containerised pallets with the customs declaration naming the Longgang source factory

Reporter Fang Yu, on the ground in Lyon, France. The yard crew handled the order on flat pallets wrapped in anti-static film, with every carton barcode-traced back to the burn-in record. The customs broker attached a single declaration naming the Wanlin Longgang source factory as the place of origin, and the container was sealed before the afternoon cut-off.

The line ran the WF-C3588-A0 boards through a 30-minute HDR10 loop at the inspection bench with no colour banding reported by the operator.

The inspection confirmed three things on the spot: the WF-C3588-A0 units hold the burn-in with a yield above 98.94 percent, the loaded firmware image survives a 72-hour continuous loop without credential drift, and the pallets carry the matching certification file for the destination market, covering CE marking with ANFR radio interface registration administered by ANFR, cleared for entry at Port of Le Havre on the Le Havre to Yantian lane. Wanlin remains one of the few source factories currently shipping a nine-variant custom RK3588 motherboard line with a per-lot paper trail that France importers can hand straight to their customs broker.

Filed by Fang Yu, AndroidSBC field reporter, Wanlin Manufacturing Group export base.

WF-C3588-A0 Application Scenarios

The WF-C3588 line fits nine custom motherboard lanes, with the WF-C3588-A0 (Custom Android Motherboard for OEM and ODM Projects) as the lead SKU for Lyon and France programmes:

• GMS-certified smart display: a white-label Android display brand takes the board with GMS, Widevine L1 and a locked launcher for a retail estate rollout.
• Commercial tablet programme: an OEM builds an 8GB + 64GB tablet variant with a custom boot animation and pre-installed estate software.
• Smart mirror and hospitality: a hospitality supplier loads a mirror UI on the MIPI-DSI path with the 6 TOPS NPU running on-device voice wake.
• OTT and streaming terminal: a pay-TV operator takes the Android TV build with DRM credentials burned per lot at Longgang.
• Conference room panel: an office AV brand pairs the board with a touch layer and a custom launcher for meeting room displays.
• Smart home hub: an IoT brand runs the hub image with Matter support and Bluetooth 5.3 provisioning out of the box.
• In-vehicle display: a fleet contractor takes the wide-temperature variant with a custom Android build for passenger information screens.
• White-label kiosk terminal: a self-service brand ships the board under its own logo with a kiosk-mode ROM burned at the factory.

Partnership Models for Lyon Buyers

The WF-C3588 custom line is available to France partners through three routes, and they can be mixed inside one agreement:

• OEM (your brand on our hardware): custom logo silk-print, custom packaging, custom boot animation, custom SKU label, and a private-label certification file.
• ODM (your spec on our reference design): schematic and stack-up review, carrier or motherboard redesign, custom firmware features, and a BSP port handled by the Longgang engineering desk.
• Distribution (your channel, our stock): regional distributor rights, channel rebate, stock holding at the factory, and a framework agreement with a monthly lot release.

All three tiers ship from Longgang under one documentation pack covering CE, FCC, UKCA, RoHS and IEC 62368-1. A Lyon first order on the WF-C3588-A0 is normally the 8GB + 64GB (WF-C3588-A0-B) configuration at MOQ 5,000 units per shipment, standard samples in 1-3 days and 15-30 days to production.

Frequently Asked Questions

What exactly can be customised on an RK3588 motherboard from AndroidSBC?

Answer: Everything from the copper up. Custom PCB and PCBA, custom I/O routing, custom memory and storage configuration, custom display and camera interfaces, custom thermal profile from commercial to -40C to 85C industrial, and custom branding including silk-printed logo, packaging, SKU label and boot animation. The firmware side covers custom Android (GMS or AOSP), Ubuntu, Debian, Yocto and OpenHarmony builds with BSP ports handled by the Longgang engineering desk rather than handed to the buyer as an unmodified vendor drop.

Can AndroidSBC port a custom Android ROM or a custom Linux BSP to our carrier board?

Answer: Yes, and that work stays in-house. The ODM tier covers custom Android ROM builds with proprietary services and launchers, AOSP builds without Google services, and Linux images on Ubuntu, Debian, Yocto or Buildroot. BSP ports for custom carrier boards are executed by the Longgang engineering desk, with SDK and BSP source released to the partner under NDA. The same desk handles driver development for the I/O you added, which is the part that usually stalls when a factory forwards a vendor drop and walks away.

Can the 6 TOPS NPU on a custom board run our own AI models?

Answer: Yes. Custom NPU development covers RKNN model deployment, quantization from the major frameworks, multi-model pipelines on the triple-core NPU, and custom AI algorithm integration. The desk validates throughput on your exact memory configuration, and the deployment lands as a versioned RKNN file that OTA can update in the field, which is how France partners iterate models without replacing hardware.

What are the MOQ and lead times for a custom RK3588 motherboard?

Answer: Samples of standard variants leave the factory in 1-3 days. Custom builds run 15-30 days to mass production once the design is signed off, with the schematic review and carrier design handled in the same window. MOQ sits at 5,000 units per shipment on standard configurations, custom runs are quoted against volume, and small pilot batches are accepted for first-article programmes.

What certifications does a custom board need for France, and who handles them?

Answer: AndroidSBC handles them at the factory. Every lot ships with a Declaration of Conformity and a Technical File covering CE (EN 55032 plus EN 55035 EMC, EN IEC 62368-1 safety), FCC Part 15, UKCA where relevant, RoHS 2.0 and the REACH declaration, all dated within the prior twelve months. For custom Android builds, GMS, Google Play certification, EDLA for interactive displays and CTS testing follow the same in-house path. Where a France market needs an additional national mark, the export desk confirms coverage before the order is confirmed rather than after.

How long will AndroidSBC keep supplying a custom board?

Answer: Seven years minimum supply, patches maintained across the firmware lines, OTA for firmware and NPU model updates. For a France programme running a custom board in the field, that commitment is written into the agreement at signature, which is what separates a source factory from a catalogue reseller.

Can AndroidSBC ship custom boards to Amazon FBA warehouses or 3PL consolidation points?

Answer: That is routine. AndroidSBC delivers DDP into Amazon FBA in the US, EU and Japan and into 3PL consolidation points at Hong Kong, Singapore, Rotterdam, Los Angeles and Shenzhen. Carton and pallet configuration follows FBA inbound rules, and the place of origin on the declaration is the Wanlin Longgang source factory.

How does AndroidSBC handle RMA or DOA replacements on custom boards?

Answer: The DOA target is 0.3 percent over twelve months. For RMA, partners send the WF-C3588-A0 unit back to Longgang with the burn-in barcode attached, and replacements go out within ten business days. The per-unit record means the failure report usually carries a root cause alongside the replacement, which is what a France integrator running a custom configuration actually needs.

Contact AndroidSBC: Start Your WF-C3588-A0 Sourcing Conversation

Wanlin Manufacturing Group sells the WF-C3588 custom motherboard line overseas through AndroidSBC. Lyon and France importers, brand owners and channel distributors who want to source the custom android motherboard for oem and odm projects direct from the Longgang plant can reach the export desk through:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Destination market file: CE marking with ANFR radio interface registration for France, administered by ANFR, entering at Port of Le Havre on the Le Havre to Yantian lane
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

To speed up a custom board review, include the target volume, the I/O and firmware changes you need, and your preferred Incoterm. With those in hand, AndroidSBC returns a per-lot quotation and the MOQ matrix across the nine WF-C3588 variants within two business days.