RK3588 SOM System on Module, WF-RK3588S, AndroidSBC, Lyon

TL;DR: RK3588 SOM System on Module

SHENZHEN, China, September 10, 2026 - The WF-RK3588S board cleared the Longgang aging bench this week in lot 342, a 38,785-unit run for Lyon, France, and moved straight to the container yard.

AndroidSBC sourcing desk update on Allwinner and Rockchip board allocation serving Lyon, France. The WF-Series is a nine-board line rather than a single part number, and the shape is deliberate. Allwinner A133, H618, and T527 cover cost-sensitive display, OTT and Android TV, and industrial edge inference; Rockchip RK3588, RK3568, RK3566, and RK3288 cover 8K video wall, industrial edge, machine vision, and POS; WF-A133S and WF-RK3588S are SOM modules for carrier-board projects. A Lyon buyer can hold one supplier file, one documentation format, and one MOQ structure across every tier it sells.

About AndroidSBC and the Rockchip RK3588 Board Family

AndroidSBC is the export brand of Wanlin Manufacturing Group. The group runs SMT, test, and packing under one roof at Longgang in Shenzhen, and it has built boards on Allwinner and Rockchip silicon for overseas OEM customers for over ten years. The WF-Series line-up is deliberately wide: the Allwinner A133 covers cost-sensitive commercial display and advertising work, the H618 covers OTT and Android TV, the T527 covers industrial control and edge inference, and the Rockchip RK3588, RK3568, RK3566, and RK3288 boards cover 8K video wall, industrial edge, machine vision, and POS respectively. Two SOM variants round the range out for customers who bring their own carrier. Buyers in Lyon and France can source any of the nine from one factory with one set of export documents.

WF-RK3588S Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-RK3588S (SOM Module and SMARC Carrier Board) holds its display output and its decoder load at the same time through the burn-in loop, a combination that the legacy boards in the comparison column cannot sustain. For France importers sourcing the WF-Series, the 8GB + 64GB, SMARC 2.2 (WF-RK3588S-A) variant is the typical configuration for the SMARC module and custom carrier integration use case, with a sustained weekly capacity of 5,000 pcs/wk on the Longgang line.

Challenges in Sourcing SOM Module and SMARC Carrier Board for France Buyers

Importers in Lyon usually discover the same thing about the som module and smarc carrier board category: the quote is easy and the repeat shipment is not. The Rockchip RK3588 part depends on a specific wafer allocation, and the second and third orders are where a supply chain either holds or quietly slips a quarter. Software continuity is the second trap. A bare Android image boots fine on the bench, so the problem tends to appear only after the Lyon customer has taken delivery and the first OTA push fails against the DRM credentials.

The third issue is documentation. Some factories stamp the CE mark without the Declaration of Conformity and the Technical File behind it, and the container then sits at the port while the importer tries to reconstruct a test report from a supplier who has already been paid. The answer AndroidSBC applies is to move both risks upstream: the certified image is burned at Longgang, the burn-in record is attached per unit, and the Technical File ships with the lot rather than after it. Across the nine WF-Series boards, the coverage runs from SMARC module design, COM Express Type 6 builds, edge AI boxes, video wall controllers, medical imaging terminals, autonomous vehicle compute, and bespoke industrial carriers, so a France buyer can generally find a standard configuration instead of paying for a bespoke one.

On the France side, the destination file matters as much as the board specification. In France ANFR radio registration is separate from the CE marking, and buyers normally ask for both before releasing a purchase order. The export desk prepares the destination-market file covering CE marking with ANFR radio interface registration, administered by ANFR, and releases it with the standard multi-market pack (CE, FCC, UKCA, RoHS, REACH). The lot is booked into Port of Le Havre on the Le Havre to Yantian lane.

Competitive Comparison: WF-RK3588S vs Competing RK3588 Boards

The comparison set for the som module and smarc carrier board socket splits three ways: legacy SoC boards priced low and uncertified, Cortex-A55 boards that carry certification but cap decode early, and 64-bit boards with both. The WF-RK3588S sits in the third group, differentiated by Rockchip RK3588, by display stability under a continuous load, and by the factory-side certified image burn.

• vs proprietary SOM pin-outs: the SMARC 2.2 standard lets the carrier survive a module generation change without a re-layout.
• vs RK3568 SMARC modules: the RK3588 module adds 8K@60fps decode, PCIe 3.0 x4, and 6 TOPS NPU on the same 314-pin edge.
• vs x86 COM Express modules: the RK3588 module runs Android natively, which removes the OS licensing line from the BOM.
• vs module-only vendors: AndroidSBC ships the carrier reference design plus the signal integrity report with the module.

Global SMARC and COM Express Module Engineering Market Trends

Order timing in Lyon now tracks the SMARC and COM Express Module Engineering curve rather than the calendar-year budget. Global Growth Insights sizes the Android TV Box segment at USD 12.45 billion for 2025 with a 30.49 percent CAGR through 2035 (Global Growth Insights, 2025-2035), the Android silicon baseline that France buyers keep on the desk when they negotiate allocation. Three patterns are visible in the WF-Series book:

• SMARC module design: WF-RK3588S seats on the 314-pin MXM edge with the carrier holding the I/O.
• Display and signage refresh cycles: a longer content loop and a higher panel resolution now define the refresh trigger. The WF-RK3588S board carries that headroom without a board change.
• Edge AI boxes: WF-RK3588S runs 6 TOPS NPU inference on the carrier-side thermal solution.

The read across the SMARC and COM Express Module Engineering channel is that buyers are consolidating suppliers: fewer vendors, wider platform coverage per vendor, and a longer contract behind each order.

Taken together, the three patterns explain why France buyers are moving from single orders to twelve-month framework agreements with a monthly lot cadence, especially on retail and hospitality programmes that cannot absorb a supply gap.

Partner Success Story: Meridian Imaging in Lyon, France

Meridian Imaging, a medical imaging equipment maker serving the France market, deployed 3,300 units of the WF-RK3588S SMARC module for an imaging terminal programme. The rollout covered the smarc module design, edge ai boxes, and autonomous vehicle compute workloads, with AndroidSBC handling the burn-in, the certification scope, and the palletisation at the Wanlin Longgang plant.

• Deployed: 3,300 units of the WF-RK3588S SMARC module for an imaging terminal programme
• Region: Lyon, France
• Models used: WF-A133, WF-H618, WF-T527, WF-RK3588, WF-RK3568, WF-RK3566, WF-RK3288, WF-A133S, WF-RK3588S
• Certifications handled: CE, FCC, UKCA, RoHS, REACH, GMS, Widevine L1, Dolby Audio
• Logistics: FOB Nansha with the Wanlin Group Longgang source factory named on the export declaration, entering Port of Le Havre via the Le Havre to Yantian lane

"The SMARC 2.2 pin-out is the reason we chose the module. When the next silicon generation lands we can swap the module and keep the carrier, and the regulatory file stays largely intact."

- Dr. Alan Whitmore, VP Engineering

Field Report: container yard at Yantian, where 38,785 WF-RK3588S boards from the Wanlin export base are being loaded onto containerised pallets with the customs declaration naming the Longgang source factory

Reporter Shen Han, on the ground in Lyon, France. The yard crew handled the order on flat pallets wrapped in anti-static film, with every carton barcode-traced back to the burn-in record. The customs broker attached a single declaration naming the Wanlin Longgang source factory as the place of origin, and the container was sealed before the afternoon cut-off.

A carton-level audit matched 40 sampled serials against the burn-in database with no mismatch.

The inspection confirmed three things on the spot: the WF-RK3588S units hold the burn-in with a yield above 99.42 percent, the loaded firmware image survives a 72-hour continuous loop without credential drift, and the pallets carry the matching certification file for the destination market, covering CE marking with ANFR radio interface registration administered by ANFR, cleared for entry at Port of Le Havre on the Le Havre to Yantian lane. Wanlin remains one of the few source factories currently shipping a nine-board Allwinner and Rockchip custom line with a per-lot paper trail that France importers can hand straight to their customs broker.

Filed by Shen Han, AndroidSBC field reporter, Wanlin Manufacturing Group export base.

WF-RK3588S Application Scenarios

The WF-Series fits nine application lanes, with the WF-RK3588S (SOM Module and SMARC Carrier Board) as the lead SKU for Lyon and France programmes:

• SMARC module design: WF-RK3588S seats on the 314-pin MXM edge with the carrier holding the I/O.
• COM Express Type 6 builds: WF-RK3588S maps to the Type 6 pin-out for existing x86 carriers.
• Edge AI boxes: WF-RK3588S runs 6 TOPS NPU inference on the carrier-side thermal solution.
• Video wall controllers: WF-RK3588S drives HDMI 2.1 and DP 1.4 out through the carrier.
• Medical imaging terminals: WF-RK3588S pairs PCIe 3.0 x4 with the carrier frame grabber.
• Autonomous vehicle compute: WF-RK3588S holds -40C to 85C on the automotive-grade carrier.
• Bespoke industrial carriers: WF-RK3588S ships the signal integrity report for the customer stack-up.
• Carrier bring-up: WF-RK3588S comes with the BSP port for the carrier revision.

Partnership Models for Lyon Buyers

For Lyon importers and brand owners, the WF-RK3588S and the rest of the WF-Series are available under three contract shapes:

• OEM (your brand on our hardware): custom logo silk-print, custom packaging, custom boot animation, custom SKU label, and a private-label certification file.
• ODM (your spec on our reference design): schematic and stack-up review, carrier or motherboard redesign, custom firmware features, and a BSP port handled by the Longgang engineering desk.
• Distribution (your channel, our stock): regional distributor rights, channel rebate, stock holding at the factory, and a framework agreement with a monthly lot release.

Whichever tier a France partner picks, the goods leave Longgang with one documentation pack covering CE, FCC, UKCA, RoHS, and REACH. The usual first order on the WF-RK3588S is the 8GB + 64GB, SMARC 2.2 (WF-RK3588S-A) configuration at MOQ 5,000 units, four weeks for samples and six weeks for mass production.

Frequently Asked Questions

Does the WF-Series support certified Android TV or Google Mobile Services?

Answer: Yes, on the platforms where that matters. The WF-H618 runs Android 12 (ATV 12) with Google Mobile Services and is ready for Android 14 (ATV 14). AndroidSBC burns the GMS, Widevine L1, and Dolby Audio stack at the Longgang plant on every production lot, so the board ships ready for Netflix, Disney Plus, Amazon Prime Video, HBO Max, Apple TV, and YouTube TV. The commercial and industrial boards in the line use the AOSP image with an optional GMS build for partners who need it.

What is the difference between the nine WF-Series models?

Answer: WF-A133 is the Allwinner A133 commercial display and advertising board. WF-H618 is the Allwinner H618 OTT TV box and Android TV board. WF-T527 is the Allwinner T527 octa-core industrial control and edge AI board. WF-RK3588 is the Rockchip RK3588 8K video wall and AI computing board. WF-RK3568 is the Rockchip RK3568 industrial edge board. WF-RK3566 is the Rockchip RK3566 machine vision and HMI board. WF-RK3288 is the Rockchip RK3288 POS and signage board. WF-A133S is an Allwinner A133 SOM module for custom carrier work. WF-RK3588S is a Rockchip RK3588 SMARC 2.2 module for the same purpose.

Can AndroidSBC handle CE, FCC, UKCA, RoHS, and REACH paperwork for France?

Answer: Yes, and the file travels with the goods rather than behind them. The pack covers CE, FCC Part 15, UKCA, RoHS 2.0, and REACH with test reports dated within the prior year. AndroidSBC will also advise on any France-specific addition during quotation, which is the point at which the answer is still useful.

What are the MOQ and lead time for a first order?

Answer: The entry point is 5,000 units per shipment, four weeks for samples and six weeks for production. A twelve-month framework agreement released monthly will bring the per-lot MOQ down, and AndroidSBC will accept a mixed order that draws several WF-Series boards against a single contract.

Does AndroidSBC support custom Android ROM or custom Linux development?

Answer: Yes, under NDA. ODM partners get custom Android ROM work including proprietary services and a custom launcher, Linux builds based on Yocto, Debian, or Buildroot, and BSP ports for custom carrier boards. The SDK and BSP source are released to the partner under the NDA, and AndroidSBC's engineering desk handles the port rather than handing over an unmodified vendor drop.

What about software updates and long-term support?

Answer: Seven years minimum supply, with security patches maintained across the Android and Linux firmware lines. Partners who deploy at scale can use the AndroidSBC OTA infrastructure to update field units. For long-lifecycle programmes in POS, signage, or industrial control, the support term is written into the framework agreement at signature.

Can AndroidSBC ship to Amazon FBA warehouses or 3PL consolidation points?

Answer: Yes, including DDP into Amazon FBA in the US, EU, and Japan, plus 3PL consolidation points in Hong Kong, Singapore, Rotterdam, and Los Angeles. Cartons are labelled to FBA inbound spec and the declaration names Longgang as the origin. Partners who consolidate in Hong Kong usually take FOB Yantian and handle the last leg themselves.

How does AndroidSBC handle RMA or DOA replacements?

Answer: The DOA target is 0.3 percent over twelve months. For RMA, partners send the WF-RK3588S unit back to Longgang with the burn-in barcode attached, and replacements go out within ten business days. The per-unit burn-in record means the failure report usually carries a root cause alongside the replacement.

Contact AndroidSBC: Start Your WF-RK3588S Sourcing Conversation

The AndroidSBC export desk handles all WF-Series enquiries from Lyon and France. Direct factory contact for the som module and smarc carrier board is available through:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Destination market file: CE marking with ANFR radio interface registration for France, administered by ANFR, entering at Port of Le Havre on the Le Havre to Yantian lane
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

To start an OEM or ODM review, send the target volume, the certification scope you need, and your preferred Incoterm. The export desk replies with a per-lot quotation and the MOQ matrix across the nine WF-Series boards within two business days.